Grayfoot Dogwalks
6' Training
8' Regulation
12' Regulation



Shown here is the 12 foot  long by 4 foot high
 Grayfoot Dogwalk.
The 6 foot by 2 foot and the 8 foot by 3 foot are
of the same design and similar in appearance.
Each Dogwalk consists of  3 sections that are
joined together by a single 1/2 inch solid pin
with a safety clip at either end
of the center section.

The sections have different joint connections
to keep them always in the same configuration.

The legs are made of  a
thick-wall galvinized metal tube
which resists corrosion
when outside year around.

Additionally the legs are fitted with a white PVC cap
on the bottom to prevent sinking into soft surfaces,
 such as grass, sand,etc.		As with all Grayfoot Contact equipment
these Dogwalks are available with
or without slats at no additional charge.

The slats can be either a
3/8" thick by 1 1/2" wide plywood with
a 30 degree taper on both edges
or a 1/4" x 1 1/2" flat birch plywood,
or a combination of both.

 The top and ramp surface's are textured with a
sprayed-on non-skid material,
then painted with flat exterior latex paint
as per AKC and USDAA specifications. 


The surface colors are the standard Grayfoot blue and safety yellow.
The frame is powdercoated gray for maximum protection.
Optional surface and frame colors, as shown in the above photo,
are available at minimum additional charge.

Prices

For Additional Information, or to Purchase a Grayfoot Dogwalk
 Call 505-238-3341 or email us at  info@grayfootagility.com